Дополнения
Чтобы попробовать тысячи доступных здесь дополнений, загрузите Mozilla Firefox, быстрый, бесплатный способ веб-сёрфинга!
ЗакрытьДобро пожаловать в дополнения Firefox.
Выбирайте из тысяч дополнительных функций и стилей, чтобы настроить Firefox по своему вкусу.
ЗакрытьОтзывы на Signature Switch
276 отзывов на это дополнение
Рейтинг 3 из 5 звёзд
I've been using this add-on for several years and have found it indispensable for handling different signatures for different situations.
I have one major complaint, however -- the add-on insists on including the so-called "Usenet signature separator" (a line containing two hyphens and a space) at the top of any signature.
Apparently the author of the add-on was under the (mis)impression that this separator line was mandated by Internet e-mail standards. In fact, it is not -- it is a convention expected only in the obsolescent Usenet newsgroup system, and it has never been mandated for e-mail. However, I was unable to convince the author to consider removing the separator line or even making it optional.
Note, BTW, that a configuration flag (mail.identity.default.suppress_signature_separator) was added to Thunderbird some time ago to omit the separator line before the initial signature included in a brand-new message. However, the Signature Switch add-on doesn't pay attention to this configuration flag -- perhaps, as I said above, because the author may still be convinced (mistakenly) that the separator line is a mandatory Internet e-mail standard which he must follow regardless of how many people want to ignore it. Whatever . . . .
From a technical point of view, it might be more complicated for the add-on to remove or replace a signature block if it isn't demarcated by the Usenet-standard separator line. On the other hand, it might be acceptable to assume that the last empty line in the e-mail body marked the start of the signature block.
Many people have complained that Signature Switch doesn't support embedding the signature before quoted text from a previous message. Accurately identifying an embedded signature block (in order to remove or replace it) could certainly be tricky, but I assume it could somehow be done. An embedded signature block absolutely must not include the Usenet separator line, since e-mail programs which support the separator line would misinterpret the bottom-quoted text after the embedded signature block as being part of the signature.
P.S.: As a kind of workaround, I discovered that if I include my own Usenet signature separator line in my signature file, Signature Switch will see it and will avoid adding its own separator. In the HTML versions of my various signatures, I specify a white colour for my own separator line -- so one of my signature files looks like this (remember the Signature Switch convention of combining both plain-text and HTML signatures into a single file, separated by a line containing only a single equals sign):
Rich
=
<span style="color:#FFFFFF">-- </span>
<span style="color:#800000"><b>Rich</b></span>
When I use the above signature, even though my separator line is enclosed in HTML markup, Signature Switch still notices it and doesn't add a separator of its own. This workaround doesn't help if I am composing plain text e-mail, and the add-on still puts the signature at the bottom of the message even if I'm writing my reply text above quoted material, but at least the separator line is invisible in HTML, so it's not quite so unsightly.
Рейтинг 4 из 5 звёзд
Dieses Add-On hilft sehr, wenn man bei Emails aus verschiedene Signaturen auswählen will.
Drei kleine Verbesserungswünsche habe ich aber doch:
1. Die Signature müsste an genau der Stelle eingefügt werden, wo der Cursor im Text steht, also meistens gleich NACH den gerade geschriebenen Zeilen (momentan wird die Signatur automatisch ganz ans Ende der Mail gesetzt, was bei beantworteten Emails sehr unpraktisch ist.
2. Es müsste mit einem einzigen Tastenkürzel eine Liste mit allen verfügbaren Signaturen erscheinen, aus denen man die richtige auswählen kann.
3. Die Trennstriche über der Signatur stören etwas, darauf könnte man verzichten.
Рейтинг 3 из 5 звёзд
Excellent handling of signatures but as just about everybody here says inability to place signature above the quotes makes this add-on barely usable. Inflexibility in positioning the signature text is not helpful.
Это отзыв для предыдущей версии этого дополнения (1.6.14).Рейтинг 3 из 5 звёзд
+1 To be able to put the signature above the quote and not at the end of the page is mandatory as everyone does like this.
Это отзыв для предыдущей версии этого дополнения (1.6.14).Рейтинг 3 из 5 звёзд
As the previous users before me, I can't insert my signature below the reply and above the quote. This is a big issue, but the rest of the addon is great.
I'll have to search for another signature extr, but I'll surely come back to this one if the position issue is solved.
Рейтинг 1 из 5 звёзд
+1 First Witness, need to put signature above the quote. Usefull when answering very long email thread.
Это отзыв для предыдущей версии этого дополнения (1.6.14).Рейтинг 1 из 5 звёзд
This would be a great product if it would put the signature above the quote and not at the end of the page. Does not work in the business world.
Это отзыв для предыдущей версии этого дополнения (1.6.13).Рейтинг 3 из 5 звёзд
I am using .html signatures. When I composed reply message, signature was placed below my reply but above the quote, like I set it. After I installed extension, signature is placed at the very end of the email.
This extension should be revised, only to offer a choice among the signature files. The rest procedure should remain the same like in basic Thunderbird version (without this extension).
Is there any expert who could do this?
Рейтинг 3 из 5 звёзд
I have used this for quite some time now in the hope that the flaw that does not permit the signature to rest adjacent to the message above the quotes will be corrected. The add-on is a really great idea if it is implemented to be usable. Thanks and Bye.
Это отзыв для предыдущей версии этого дополнения (1.6.13).Рейтинг 5 из 5 звёзд
Matthew,
You mentioned that the signature ends up at the VERY END of the thread.
Have you looked at the menu in TB and clicked on "Tools" then on Account Settings.
At the lower half of the first page, you'll see where you point to the Signature.html that you've created.
I've included an avatar below my name, and above my address etc...
Then you must go to page Composition and Addressing in the TB Tools menu.
At the top of the page, I have chosen the following:
"Start my Reply above the Quote"
and just below that...
"Place my Signature below my reply but above the Quote"
Does that help you?
I have an additional problem [if] someone could answer it.
I have created three Signature [html files]. which I saved on my PC.
1. Casual Signature.html
2. Business Signature.html
and
3 Wife & Me Signature.html
These all have different avatars included.
Unfortunately in the TB Tools>Account Settings, there is only one location to pooint to a signature.
When I use the Signature Switch it shows the Casual/Business/Wife&me choices, but the only one that works [including the avatar] is the first one I pointed to.
The two others just show an empty box where I added the avatar????
Anyone able to change the Signature setup in TB Tools? to make the Signature Switch work?
If there is something I'm doing wrong, lemme know please?
Cheers.
Vernongt
Рейтинг 5 из 5 звёзд
Handy and quick to switch from one signature to another.
If I can ask for a new feature:
Would i be possible to have two default signatures ?
-> one for text mails and another one for html mails
Thanks a lot for this addon anyway.
Рейтинг 3 из 5 звёзд
This addon is an awesome idea, but it has one major flaw which makes it useless for many people, including me. The signature always is placed at the VERY END of the email. This means if there is a long thread, the signature could end up being placed at the very end of the thread which is useless. No explanation should be necessary to explain why that is the most ridiculous limitation in the history of signature addons.
No surprise that most of the reviews here all mention this same limitation. Achim, do you think that might be reason to add the capability to place the signature at the end of the current reply? Also, can you please add an option to get rid of the separating "--". I don't want or need that.
For now, I've uninstalled it. Too bad. It had real potential.
Рейтинг 2 из 5 звёзд
Achim, you are not so happy with getting dozen of bad reviews about the same bug, which we understand.
You give the argument that the signature "should" be positionned at the end of the message. Probably because long time ago it has been like that. We can understand this argument too.
But nowaday if 99% of the people would like to have their signature positionned RIGHT BELOW THEIR REPLY and not far below at the bottom of the email where nobody will scroll down to read... You might want to consider giving them at least the option to choose where they want their signature to be put. Don't think so ?
When I forward to somebody an email i've got from another person, and this email has already four replies in it, I want to have my signature right below my added text and not 1 meter down :-). This sounds logical too isn't it ?
Рейтинг 4 из 5 звёзд
Email signature MUST go at the end of the message, they cannot and they SHOULD NOT be positioned freely wherever one chooses.
Before complaining about a missing feature, one should do his/her homework!
Рейтинг 2 из 5 звёзд
There's no way to choose a position where to insert the signature, it can only be written at the bottom of the message.
Signature separation sign -- can't be removed either.
As I need to have such features, I unistalled the extension.
Рейтинг 3 из 5 звёзд
The signature is inserted at the end of the global mail, not a cursor of end of composed mail part.
Это отзыв для предыдущей версии этого дополнения (1.6.13).Рейтинг 2 из 5 звёзд
Frustrating experience with this. From what I can tell, You can't put signatures where you want it, only where Signature Switch wants it. Has annoying signature separation "--" put in when you don't necessarily want it. Formatting is off when you copy and paste into your database of signature. Was using this on Mac OS. Maybe Windows users have had a better experience. Used Clippings, and it does everything I need (or at least what Eudora used to do) for my signature needs.
Это отзыв для предыдущей версии этого дополнения (1.6.13).Рейтинг 5 из 5 звёзд
The addon is great, thank you !
But can you add the function to put my signature above quoted text ?
I switched from outlook and this improvement would be great.
Рейтинг 5 из 5 звёзд
I use this daily, and love it. Makes switching from Outlook a nicer experience.
Would it be hard to make the signature appear at the cursor location, or above the quote?
Thanks for the constant updates to this too.
Рейтинг 4 из 5 звёзд
Please!!!! add the function to put my signature above quoted text! And the ability to remove the separator dashes.
Это отзыв для предыдущей версии этого дополнения (1.6.13).And you really think that rating my add-on/work with just one star will motivate to implement your request?! *lol* :-D
Для создания своих подборок вам необходимо иметь учётную запись на сайте дополнений Mozilla.
